Silicone Forefoot Prosthesis

Silicone forefoot prostheses harmonize the gait pattern and contribute to physiological roll-over of the foot.

The fixation of the prosthesis onto the residual limb is ensured by surface adhesion and full contact fit of the edges.

The customized socket design allows for a close fit, even pressure distribution and compression of the residual limb.

Thanks to thin-walled socket design the patient can wear regular, non-orthopedic shoes. Silicone Service Fabrication offers a standard
and a functional fitting version.

You may learn the impression technique for making a plaster negative and the molding technique at Otto Bock seminars.

Silicone products are hygienic and easy to clean. They can be washed with soap and water. If very soiled, they can also be cleaned by boiling.

• For fabrication of the trial prosthesis, Otto Bock requires a plaster negative of the residual limb and a plaster positive of the contralateral side.
• In addition, Otto Bock needs four photos of both feet from different perspectives.
• The trial prosthesis can be tested by the patient for approximately 4 weeks. During that time, it can be modified by the prosthetist if necessary.
• Information on the specific prosthesis is required for the color design of the prosthesis. To obtain this information, determine the color using the Color stipulation sheet or the Color stipulation kit.
• After receiving the plaster casts, trial prosthesis and Color stipulation, the definitive prosthesis is fabricated.
• The definitive silicone prosthesis is sent to the prosthetist.